">

Whirlpool Starter Care Pack

Pure-Spa Whirlpool Cleaning Fluid

Directions for use:

1. Fill the bath with warm water (approx 35oC) making sure the jets are just covered.

2. Add the correct amount of product to the water


Dilution with water - use the following as a guide.
For regular cleaning at least every 3 - 4 weeks or more often, depending on usage.
Dilute with water up to 600:1 approx 1/4 bottle (250mls) per average bath (150 Litres of water)



If the whirlpool hasn't been cleaned in some time the product can be diluted with up to 80:1 with water.

As a guide this is normally between 1/2 a bottle (500mls) and a full bottle (1L) per application

3. Close Air control (make sure the whirlpool is on its lowest setting) & run system for 4 - 5 mins

4. Turn off & let stand for approx 2-3 hrs, or overnight if necessary. Run system occasionally to agitate.

5. Drain the bath, refill with cold water to flush through, run system for 2 minutes, drain the bath & wipe interior surface.



IMPORTANT - Whirlpools should be cleaned & sanitised regularly to help remove the build up of bath deposits & dirt, & to help minimise the growth of bacteria - even if the system isn't used very often! This product contains both cleaning and sanitising agents but for best results we recommend using Pure-Spa Sanitising tablets in between cleaning applications.

Suitable for use on surfaces including chromium, ceramics, plastics, stainless steel & porcelain

Contains no harsh solvents or alkalis or acids. Has an antimicrobial value of 120 when tested to BS 647. Fully Biodegradable. Presents no effluent problems. Septic tank friendly


HEALTH & SAFETY Non-hazardous. In the event of eye contact, rinse with plenty of clean water, if irritation persists immediate medical attention should be sought. DO NOT INGEST DO NOT MIX WITH OTHER CHEMICALS KEEP OUT OF REACH OF CHILDREN Volume 1 Litre (1000 mls)

Contains: Silicates < 2% Cationic suractants < 2% Non Ionic Surfactants < 10% Nitrilotriacetate < 5%

Pure-Spa Whirlpool Sanitising Tablets

!Directions for use (avg size bath)
1. After each use of the bath & before emptying, put 1 tablet into the bath water.

2. Switch on the system & let it run for 2-3 minutes

3. Switch off the system & drain as normal
4. Your Whirlpool bath has now been been effectively treated.

Only use in accordance with directions on label. Content 97.5g e
Note: Avoid prolonged contact with metals
Harmful if swallowed. Contains Sodium Dichloroisocyanurate

1.7g NaDCC per tablet Irritating to eyes & respiratory system. Keep out of reach of children
Keep container dry.
In case of fire & or explosion do not breathe fumes.
Contact with acids liberates toxic gas.
In case of contact with eyes, rinse immediately with plenty of water & seek medical advice.
CAUTION: Solution may bleach fabrics.
WARNING: Do not use with other products.
May release dangerous gases (chlorine)
Very toxic to aquatic organisms, may cause long term adverse effects to the aquatic environment.
Technical info - Pure-Spa Sanitising Tablets

These small, white tablets are based on dry chlorine donor, sodium dichloroisocyanurate (NaDCC) which is blended with effervescent components before being compressed into tablet form. The result is a fast-dissolving, highly convenient, safer and more accurate alternative to liquid bleach.

Chlorine is regarded by many, including the Health Service and the Government, as the most effective disinfectant in the fight against disease. That is why it is recommended by the world’s major authorities for use against HIV (AIDS) and Hepatitis B viruses and why almost all of the world’s piped water supplies are treated with chlorine.

Disinfecting solutions prepared from The Pure-Spa Sanitising Tablets containing NaDCC are fast acting and have a complete spectrum of biocidal activity. Bacteria, bacterial spores, algae, fungi, protozoa and viruses are all sensitive to their effects.

The problem of corrosion associated with liquid bleach has often resulted in the use of more expensive and less effective alternatives. It has been demonstrated that chlorine solutions produced using NaDCC tablets are in general significantly less corrosive.